Today: Thursday, May 15
Home Home Site Map Site Map Contacts Contacts Chinese
Search
Company Products Technology e-Catalog News
 
 
standard
PAT 3035-SEOrder Now


Wide Bandwidth Low Loss Toroidal Output Transformer for Single Ended Tube Amplifiers
RATINGS
Application 300B & equivalents
Primary Impedance3490 ohm
Secondary Impedance4 + 8 ohm
Turns Ratio Np/Ns (4 ohm secondary)29.52
-0.1 dB Frequency Range16 Hz - 21 kHz
-1 dB Frequency Range7 Hz - 48 kHz
-3 dB Frequency Range3 Hz - 90 kHz
Nominal Power, RMS13 W
Full Power Bandwidth starting at20 Hz
Total Primary Inductance28 H
Primary Leakage Inductance7 mH
Effective Primary Capacitance1.1 nF
Saturation Primary DC current172.72 mA
Total Primary Resistance50 ohm
Total Secondary Resistance0.1 ohm
Tube Plate Resistance (300B)0.7 kohm
Insertion Loss0.17 dB
Q-factor 2nd order HF roll-off0.49
HF roll-off Specific Frequency142.54 kHz
Quality Factor (Lp/Lsp)4100
Quality Decade Factor3.6
Tuning Factor6.38
Tuning Decade Factor0.81
Frequency Decade Factor (note 4)4.41

Notes
  1. Calculated and measured under the conditions of applying 0.5* Idc-sat.
  2. 230 V 50 Hz measurement over the total primary winding.
  3. Calculated and measured at 1 mW in Rls; ri and Rls are resistive loads.
  4. Defined as FDF = log (fh3/f13) = number of frequency decades transfered.
  5. ir. Menno Vanderveen; Theory and Practise of Wide Bandwidth Toroidal Output Transformers, 97th AES Convention San Francisco, preprint.

Response Curves


Schematics


Mechanical


Weight Dimensions (mm)
kg A B C D E F G H
5.4 152.4 88.9 8.7 25 200 20 80 100


Related topics:




3050-SE | 3035-SE | 3025-SE

Standard Series (push-pull) | Single-ended | Specialist Range | Special Designs
Power Transformers | Chokes Chassis for Tube Amplifiers
Circuit Board for 70W & 100W Amplifiers | Electrostatics | Distribution
Audio Books | Audio Articles | Testimonials | Photo Gallery


Company Products Technology Contacts News Site Map