Today: Friday, May 9
Home Home Site Map Site Map Contacts Contacts Chinese
Search
Company Products Technology e-Catalog News
 
 
standard
PAT 2100-SSCROrder Now


Specialist Range Output Transformers for Tube Amplifiers
RATINGS
Application EL34
Primary Impedance (Zaa)2000 ohm
Secondary Impedance (ZL)4 ohm
Turns Ratio Np/Ns22.4
Ultra Linear Tap40%
-0.1 dB Frequency Range (flf)102 kHz
-1 dB Frequency Range (fl1)134 kHz
-3 dB Frequency Range (fl3)177 kHz
Nominal Power, RMS (pn) (note 1)100 W
Full Power Bandwidth, -3dB, starting at (fu)14 Hz
Total Primary Inductance (Lp) (note 2)675 H
Primary Leakage Inductance to Secondary (lsp)2.1 mH
Effective Primary Capacitance (cip)660 pF
Total Primary Resistance (Rip)57 ohm
Total Secondary Resistance (Ris)0.13 ohm
Insertion Loss (Ilos)0.26 dB
Tube Plate Resistance (rp)2 kohm
Q-factor 2nd order HF roll-off (Q) (note 5)0.745
HF roll-off Specific Frequency (Fo) (note 5)167 kHz
Quality Factor (Lp/Lsp) (QF) (note 5)321,000
Quality Decade Factor (QDF) (note 5)5.50
Tuning Factor (TF) (note 5)1.71
Tuning Decade Factor (TDF) (note 5)0.232
Frequency Decade Factor (FDF) (note 4, 5)5.47

Notes
  1. Calculated and measured with balanced DC current and AC anode voltage in the circuit power tubes.
  2. 230 V 50 Hz measurement over the total primary winding.
  3. Calculated and measured at 1 mW in Rls; ri and Rls are resistive loads.
  4. Defined as FDF = log (fh3/f13) = number of frequency decades transfered.
  5. ir. Menno Vanderveen; Theory and Practise of Wide Bandwidth Toroidal Output Transformers, 97th AES Convention San Francisco, preprint

Response Curves


Schematics


Mechanical




Related topics:




4070-SSCR | 2100-SSCR | 4070-CFB | 2100-CFB | 2100-CFB/H | 1070-UC

Standard Series (push-pull) | Single-ended | Specialist Range | Special Designs
Power Transformers | Chokes |
Circuit Board for 70W & 100W Amplifiers | Electrostatics | Distribution
Audio Books | Audio Articles | Testimonials | Photo Gallery


Company Products Technology Contacts News Site Map